Centrifugal pumps
Self-cooling, standardized centrifugal pumps in the ALFA R series are specially designed for a large range of use and mainly for heat transfer installations (< 350°C) on thermic oils.
Their hydraulic sizes and performance comply with the norm ISO 2858 or NF 44 121.
The ALFA R pumps are secured to a baseplate and are chosen for a wide variety of uses in the industry.Assembly using spacer coupling makes maintenance easier by keeping the hydraulic and electrical parts separated.
The self-cooling centrifugal pumps in the LR, series are specially designed for the flow of thermal fluids and for use under extreme temperatures.
Because of their mono-block design and In-Line installation, LR pumps take up limited space, which makes their integration into compact Skid assemblies much easier.
The pump and the motor form a mono-block set connected by flanges, with a common shaft.
The LF series centrifugal pumps are specially designed for a large range of varied industry uses.
Thanks to an In-Line, mono-block design, the LF series pumps do not take up a lot of space, making their integration into compact Skid types of assemblies easier.
The pump and the motor form a mono-block set connected by flanges, with a common shaft.
The centrifugal pumps in the LGF series are specially designed for industrial use of thermal fluids in a spirit of environmental protection.
The LGF pumps are designed to avoid any leaks, even fugitive ones, of products pumped outdoors. This specific tightness is obtained using magnetic coupling that can be used with either hot or cold products.
Because of their monoblock design and In-Line, assembly, LGF pumps take up limited space, which makes their integration into compact « »Skid » » assemblies much easier
The mono- and multicellular centrifugal pumps in the MGX series are specially designed for a large range of chemical and fine chemical uses, and particularly for products that are corrosive and dangerous to humankind and the environment.
The MGX pumps are designed to avoid any kind of leaks of products pumped outdoors. This specific tightness is obtained using magnetic coupling that can be used with either hot or cold products.
Thanks to their horizontal monoblock design, the MGX pumps do not take up a lot of space making their integration into compact Skid types of assemblies easier.
The centrifugal pumps in the R0 series are specially designed for a wide range of applications requiring construction in stainless steel or finer materials.
The R0 vertical pumps are assembled on a support plate and have delivery pipes on the upper area. The length under the mounting plane can be adapted to your requirements (maximum 500 mm).
The pump hydraulics can be either monocellular or multicellular according to the circuit needs.
The standardized centrifugal pumps in the ALFA series can be employed for a wide range of uses, specifically for challenging sectors such as the chemical or petrochemical industries. They comply perfectly with ISO 2858 or NF 44 121 standards.
The slab which supports the pump can serve as tank cover, with a rising pillar for the part “liquid backflows”. According to your tank’s dimensions, the length under the laying plan can reach six meters if necessary.
The pumps are specially designed for a wide range of chemical fluid applications.
Because of their vertical design with customised long shaft and base plate, the R series pumps can be used on all types and sizes of tanks.
Assembly with single or multiple stage open impellers allow using the R series pumps with clear or suspended-solid liquid applications.
